The Wayback Machine - http://web.archive.org/web/20150312061626/http://qualitechmicroscopes.com:80/sample_preperation.html
 
     SAMPLE PREPERATION
Qualitech Optical Inc.
ABRASIVE CUTTING MACHINE QS-14
» Abrasive Cutting Machine QS-14
Qualitech Micro Measurement Pro
Specifications
  • Sturdy floor model cutter for sectioning Metallography  Sample
  • Rust proof construction
  • Swivel Base for rotation
  • Steel vise
  • Cutting Capacity upto 120 mm
  • 7.5 HP, 3 Phase Motor
  • Cut-off wheel dia 14”
  • Splash proof, corrosion resistant with see-through hood
  • Cooling by Five high flow water jets from the top and sides of the wheel head to provide optimum cooling
  • Coolant Tank with 40 ltrs capacity (Two tanks one for filteration)
  • 65 mm drain for coolant recirculation
  • Two ½ HP Coolant Recirculation Pumps
  • Light in the working area provides safe and clear illumination


ABRASIVE CUTTING MACHINE QS-12
» Abrasive Cutting Machine QS-12
Qualitech Micro Measurement Pro
Specifications
  • Sturdy floor model cutter for sectioning Metallography  Samples
  • Rust proof construction
  • Steel vise
  • Cutting Capacity upto 75 mm
  • 3 HP, 3 Phase Motor
  • Cut-off wheel dia 12”
  • Splash proof, corrosion resistant with see-through hood
  • Cooling by two high flow water jets from the sides of the wheel head
    to provide optimum cooling
  • Coolant Tank with 20 ltrs capacity
  • 35 mm drain for coolant recirculation
  • One ½ HP Coolant Recirculation Pump.
  • Light in the working area provides safe and clear illumination


 
SINGLE DESK POLISHING MACHINE
» Polishing Machine
Qualitech Micro Measurement Pro
Single Desk Polishing Machine(DC motor)

This Polishing/Lapping Machine  is  designed   according   to  the needs of  metallographists. Single Disc is independently driven by high torque DC motor. The speed will be continuously   varied    as   indicated  on  the   front   fascia.  Water  faucet  arrangement &  paper  holding  band,  permits  the  discs for wet / dry grinding and final lapping. RPM shows by Digital meter and controlled by small knob.
Technical Data

Disc Diameter   : 8 inch
Motor Capacity : ½ Hp DC
Supply            : 15 Amps, 230V, Single phase.
RPM               : Digital Display
RPM Control    : Small Knob
 
Description
Polishing M /c  is  used  for  Polishing  the Metallography Samples for Microscopic observation to study various metal structures.
 
Polishing
Polishing  is  the  final step  in  producing  a  surface  that  is  flat, smooth, Scratch - free   and   mirror    like   in   appearance.  Such   a   surface    is     necessary     for     subsequent    accurate    metallographic interpretation, both qualitative & quantitative.


DOUBLE DESK POLISHING MACHINE
» Polishing Machine
Qualitech Micro Measurement Pro
Double Desk Polishing Machine(DC motor)

This Polishing/Lapping Machine  is  designed   according   to  the needs of  metallographists. Double Disc is independently driven by high torque DC motor. The speed will be continuously   varied    as   indicated  on  the   front   fascia.  Water  faucet  arrangement &  paper  holding  band,  permits  the  discs for wet / dry grinding and final lapping. RPM shows by Digital meter and controlled by small knob.
Technical Data

Discs Diameter        : 8 inch each
Motor Capacity        : ½ Hp DC
Supply                   : 15 Amps, 230V, Single phase.
RPM                      : Digital Display
RPM Control           : Small Knob
 
Description
Polishing M /c  is  used  for  Polishing  the Metallography Samples for Microscopic observation to study various metal structures.
 
Polishing
Polishing  is  the  final step  in  producing  a  surface  that  is  flat, smooth, Scratch - free   and   mirror    like   in   appearance.  Such   a   surface    is     necessary     for     subsequent    accurate    metallographic interpretation, both qualitative & quantitative.